Crown XLS 2500 Power Amplifier (2400 Watts)

 Specifications

Total Harmonic Distortion (THD): < 0.5%

Inter modulation Distortion (IMD): (60Hz and 7kHz at 4:1), From full rated output to -30dB: <0.3%

Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200

Crosstalk (below rated 8Ohm power): At 1kHz: > 85dB, At 20kHz: >55dB

Input Impedance (nominal): 20k Ohm balanced, 10k Ohm unbalanced

Load Impedance: 2 to 8 Ohm per channel in Stereo, 4 to 8 Ohm in Bridge Mono
AC Line Voltage and Frequency Configurations Available (+/- 10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 and 240 VAC 50 Hz

Ventilation: Flow-through ventilation from front to back

Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation

Air Volume Requirements (per minute per unit): 80.15 ft (2.27 m)

Minimum Guaranteed Power (per channel, both channels driven)

Stereo, 2 ohms: 1200W
Stereo, 4 ohms: 775W
Stereo, 8 ohms: 440W
Bridged mono, 4 ohms: 2400W
Bridged mono, 8 ohms: 1550W

Integrated Processing
PureBand Crossover System:
- Crossover Filter: Linkwitz-Riley 24dB per Octave
- Crossover Frequency Range: 50 HZ - 3 kHz
- Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF).
- Peakx limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers