A Lithium-ion Power Supply
If you have a battery powered speaker, and need to power your wireless mic system and mixer this product is for you!
Before checkout please fill in the above 2 question blocks - Thanks
1 Port 12v + USB with Y cable version is good for 4 hours (4 x 2.5 x 1 in.)
1 Port 12v +USB with Y cable version (6 standard cell)
1 Port 12/9 Volt and 5V 2a USB Output (Y cables available below) LiFePO4 Battery Pack, 2000 Cycles
3 -12v dc (Original) version are good for 6 hours (4.50 x 3.5 x 1.25 in.)
The 6 cell versions average run times 12 hours (6 x 4 x 1.185 in.)
Lithium-ion Power Supply (6 Versions) Need something custom Please CALL
(Note Shure GLX Wireless can work from 9-18v dc)
(Note: As a example 1 Shure SLX Reciever draws only 150ma)
DJ Rick Web
Dj Jay Book uses the CSL Lithium power pak
6 Versions available:
1-12v Dc jacks 2.1mm DC jacks (3 Standard cells) 3000ma (Includes a Y cable so 2 items can be connected)
3-12v Dc jacks 2.1mm DC jacks (3 Panasonic cells) 3000ma
3-12v Dc jacks 2.1mm DC jacks +1 Charger Jack + Power Switch + Meter (3 Panasonic cells) 3000ma
1-12v Dc jacks 2.1mm DC jacks (3 Standard cells) 6000ma (Includes a Y cable so 2 items can be connected)
3-12v Dc jacks 2.1mm DC jacks +1 Charger Jack + Power Switch + Meter (6 Panasonic cells) 6000ma
Rack Mount AC Filter Strip/Battery System + Meter (6 Panasonic cells) 6400ma This item features 4 rear ports now!
All Include: A charger and DC patch cords - Special Note the Rack mount unit is not a inverter AC type system. AC is only provided to the rear AC outlets only when AC power is available to the line cord.
Note Batteries need to be charged at the 10v level
On the 3 Port version without a meter - Charge the battery before use to guarantee full run time.
It works great!!
The newest version has 4 ports 1 for charging, and 3 for 12v outputs, power switch and meter
Designed as a permanent case install. Let's you keep all the wiring intact the Switch has 3 function modes: On/OFF/Charge
Rack Mount AC Filter Strip/Battery System - A Rick Web Project
NOW with Solid State Power Switching - NO DELAY
Twice the batteries from the original (6000ma of backup power)
The Rack mount unit offers 4 DC rear ports for mixer/wireless transformer connection. When AC power is not available for the DC transformers that come with your device, the interior battery can take over to provide 12v DC power to the devices on the lower ports that feed the mixer/wireless items.
Voltage and current meter Rear View: Charge input port.
4 transformer inputs and
4 Output Ports
Extra DC JUMPER CABLE 2 ft.
Extra JUMPER CABLE 3ft.
5V DC USB