A Lithium-ion Power Supply
Link to: Half-Rack-Power-Supply If you have a battery powered speaker, and need to power your wireless mic system and mixer this product is for you! Optional larger battery for marathons events $60
List of 12 volt mixers for your battery system:
Before checkout please fill in the above 2 question blocks - Thanks
1 Port 12v + USB with Y cable version is good for 4 hours (4 x 2.5 x 1 in.)
1 Port 12v +USB with Y cable version (6 standard cell)
3 -12v dc (Original) version are good for 6 hours (4.50 x 3.5 x 1.25 in.)
The 6 cell versions average run times 12 hours (6 x 4 x 1.185 in.)
Lithium-ion Power Supply (6 Versions) Need something custom Please CALL
(Note Shure GLX Wireless can work from 9-18v dc)
(Note: As a example 1 Shure SLX Reciever draws only 150ma)
Customer comment:
Hey Jim,
Ran the setup for the first time today. Worked great.
Jeffrey Dubia
Photo courtesy of Ryan Oettinger (With a custom CSL half rack Power Supply 16v)
Photo courtesy of Champion Sound Entertainment
DJ Barr
DJ Rick Web
Dj Jay Book uses the CSL Lithium power pak
6 Versions available:
1-12v Dc jacks 2.1mm DC jacks (3 Standard cells) 3000ma (Includes a Y cable so 2 items can be connected)
3-12v Dc jacks 2.1mm DC jacks (3 Panasonic cells) 3000ma
3-12v Dc jacks 2.1mm DC jacks +1 Charger Jack + Power Switch + Meter (3 Panasonic cells) 3000ma
1-12v Dc jacks 2.1mm DC jacks (3 Standard cells) 6000ma (Includes a Y cable so 2 items can be connected)
3-12v Dc jacks 2.1mm DC jacks +1 Charger Jack + Power Switch + Meter (6 Panasonic cells) 6000ma
Full and Half Rack Mount Battery Systems + Meter (6 Panasonic cells) 6400ma This item features 4 rear ports
All Include: A charger and DC patch cords - Special Note the Rack mount units are not a inverter AC type system.
It power DC power mixers, not IEC AC Power
Note Batteries need to be charged at the 10v level
On the 3 Port version without a meter - Charge the battery before use to guarantee full run time.
Customer Comment:
Damon Lee
It works great!!
The newest version has 4 ports 1 for charging, and 3 for 12v outputs, power switch and meter
Designed as a permanent case install. Let's you keep all the wiring intact the Switch has 3 function modes: On/OFF/Charge
Jim,
Rack Mount AC Filter Strip/Battery System - A Rick Web Project
NOW with Solid State Power Switching - NO DELAY
Twice the batteries from the original (6000ma of backup power)
New Full & Half Rack Battery Power Systems
Extra DC JUMPER CABLE 2 ft.
Extra JUMPER CABLE 3ft.
5V DC USB
Don't settle for second Best...
If your equipment is AC 120v
Select from one of these AC Inverter Systems available featuring the best batteries LIPO4