Peavey Elements™ 108C

$1,599.99 $1,099.99

Peavey Elements™ 108C


Compact Two-Way Outdoor Fully-Weatherized Speaker System
Enclosure is made of advanced technology composite fiber panels
Triple-layer perforated SS moisture-repellant grille
Water-Resistant 8” Heavy Duty aluminum cone woofer
2” diaphragm, 1” exit, Ferrofluid equipped RX22™ compression driver
Patented Quadratic Throat Waveguide™
Controlled dispersion patterns of 75 degrees by 75 degrees
Versatile suspension provisions: 3/8” eyebolts or VM70 bracket or Pole Mount
Selectable Indoor/Outdoor EQ settings
Excellent power handling capabilities
All external hardware is Stainless Steel
Cabinet coated in black Hammerhead™ poly-urea finish
Weather-sealed input cup cover with gland nut
70 Volt transformer option available, easily upgraded in the field
Overall system weatherization rating of: IP45


The new Elements™ 108C loudspeaker system from Peavey® Electronics provide unparalleled flexibility for permanent outdoor installations. The Elements™ 108C system is a two-way speaker system comprised of an 8” aluminum cone Water-Resistant woofer and an RX22™ 2” titanium diaphragm compression driver mounted on a constant directivity horn utilizing Quadratic Throat Waveguide™ technology.

The Elements™ 108C speaker system has a trapezoidal shaped enclosure, which reduces the build-up of standing waves inside the enclosure, which minimizes mid-bass and mid-range coloration’s due to the cabinet. They are constructed of 12mm advanced technology composite fiber panels and are coated with a black Hammerhead™ poly-urea finish. A 18 gauge powder-coated perforated stainless-steel metal grille with an inner hydro-phobic cloth mesh, and a foam third layer protects the front of the system from external moisture and dust. A full set of ten 3/8"-16 threaded mounting suspension points, 2 each top and 3 each bottom, and 2 each sides & bottom rear is provided for flying and mounting, as well as three sets of 4) 1/4X20 SS inserts, the sets are located on the top, rear, and bottom for use with the Peavey® Versamount™ 70+ and the Peavey® Elements™ Pole Mount bracket.

Frequency Response, 1 meter on-axis, swept-sine in anechoic environment:
64 Hz - 18 kHz (±3 dB)

Usable Low Frequency limit (-10 dB point):
52 Hz

Power Handling:
200 W continuous
400 W program
800 W peak

Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:
91 dB SPL, (2.83 V input)

Maximum Sound Pressure Level (1 meter):
114 dB SPL continuous
120 dB SPL peak

Nominal Radiation Angle:
75 degrees horizontal by 75 degrees vertical

Transducer Complement:
Low Frequency Section:
1x 8in. Woofer, Vented
Heavy-duty aluminum cone with synthetic rubber surround
High Frequency Section:
1x 0.875 in. Exit/50.8mm Voice Coil Compression Driver on Quadratic Throat™ Waveguide.
RX22™ on a 75 deg. X 75 deg. Quadratic Throat™ Waveguide

Box Tuning Frequency:
60 Hz

Electroacoustic Crossover Point:
2.0 kHz at 12 dB/octave

Recommended High pass (Infrasonic) Filter:
45 Hz, LR 24 dB/oct. type.
NOTE: To safely achieve maximum rated SPL output, audio signal must be filtered for extreme low frequency content. All high SPL vented cabinets should have this signal protection.

Input Connections:
2x Neutrik® Speakon® NL4MD & 1x 4-position barrier strip

Enclosure Materials & Finish:
1 / 2” thick advanced technology composite fiber panels, finished in black Hammerhead™ poly-urea with a lightly textured finish

Mounting provisions:
(10) 3/8"-16 Threaded Mounting Suspension Points (2 each top & 3 each bottom and 2 each sides & one bottom rear). Rubber washers are provided for use with 3/8” eyebolts, to assure a weather tight seal.
Three sets of 4) 1/4X20 SS inserts, the sets are located on the top, rear, and bottom for use with the Peavey® Versamount™ 70+ and the Peavey® Elements™ Pole Mount bracket.

Dimensions (H x W x D):
Front: 17.25 in. x 11.00 in. x 13.56 in.

Rear: 17.25 in. x 8.75 in. x 13.56 in.

Weight: 28 lb.
Dimensions: 18in. × 12in. × 15in.