Peavey Elements™ 115C

$1,899.99 $1,599.99

Peavey Elements™ 115C

The new Elements™ 115C 60X 40 and Elements™ 115C 105X60 loudspeaker systems from Peavey® provide unparalleled flexibility for permanent outdoor installations. A rotatable horn section allows the same cabinet to provide a coverage pattern that is broad in either the horizontal dimension, or the vertical dimension relative to the cabinet face.

The Elements™ 115C series systems are a two-way speaker system comprised of a 15” Water-Resistant Black Widow® woofer and an RX22™ 2” titanium diaphragm compression driver mounted on a constant directivity horn utilizing Quadratic Throat Waveguide™ technology.

The Elements™ 115C series systems have a trapezoidal shaped enclosure, which reduces the build-up of standing waves inside the enclosure, which minimizes mid-bass and mid-range coloration’s due to the cabinet. They are constructed of 12mm advanced technology composite fiber panels, and are coated with a black Hammerhead™ poly-urea finish. An 18 gauge powder-coated perforated stainless-steel metal grille with an inner hydro-phobic cloth mesh, and a foam third layer protects the front of the system from external moisture and dust. A full set of twelve 3/8"X16 threaded mounting suspension points, 3 each top and bottom, and 2 each sides & back is provided for flying and mounting, as well as three sets of 4) 1/4X20 SS inserts, the sets are located on the top, rear, and bottom for use with the Peavey® Versamount™ 70+ and the Peavey® Elements™ Pole Mount bracket.

Specifications

Two-Way Outdoor Fully-Weatherized Speaker System
Enclosure is made of advanced technology composite fiber panels
Triple-layer perforated SS moisture-repellant grille
Water-Resistant Black Widow® woofer with 1000 watt program rating
2” diaphragm, 1” exit, Ferrofluid equipped RX22™ compression driver
Patented Quadratic Throat Waveguide™
Rotatable horn section for widest coverage of the horizontal OR vertical
Controlled dispersion patterns: either 60 by 40 degrees, or 105 by 60 degrees
Versatile suspension provisions: 3/8” eyebolts or VM70 bracket or Pole Mount
Externally selectable Indoor/Outdoor EQ settings
Excellent power handling capabilities
All external hardware is Stainless Steel
Cabinet coated in black Hammerhead™ poly-urea finish
Weather-sealed input cup cover with gland nut
70 Volt transformer option available, easily upgraded in the field
Overall system weatherization rating of: IP45

Frequency Response, 1 meter on-axis, swept-sine in anechoic environment:
56 Hz - 18 kHz (±3 dB)

Usable Low Frequency limit (-10 dB point):
44 Hz

Power Handling:
500 W continuous
1,000 W program
2,000 W peak

Sound Pressure Level, 1 Watt, 1 meter in anechoic environment:
96 dB SPL, (2.83 V input)

Maximum Sound Pressure Level (1 meter):
123 dB SPL continuous
129 dB SPL peak

Nominal Radiation Angle:
Elements™ 115: 60X 40: 60 degrees horizontal by 40 degrees vertical
Elements™ 115: 105X60: 105 degrees horizontal by 60 degrees vertical
Horns are rotatable, coverage pattern can be swapped horizontal for vertical

Transducer Complement:
Low Frequency Section:
1x 15in. Woofer, Vented
1508-8 SPS WP Water-Resistant Black Widow®
High Frequency Section:
1x 0.875 in. Exit/50.8mm Voice Coil Compression Driver on Quadratic Throat™ Waveguide. RX22™
RX22™ on a 60 deg. X 40 deg. waveguide for the Elements™ 115C 60X 40, and a 105 deg. X 60 deg. waveguide for the Elements™ 115C 105X60.

Box Tuning Frequency:45 Hz

Electroacoustic Crossover Point:
Elements™ 115C 60X 40: Low Frequency –High Frequency:
1.7 kHz at 24dB/octave
Elements™ 115C 105X60: Low Frequency –High Frequency:
1.8 kHz at 24dB/octave

Recommended High pass (Infrasonic) Filter:
42 Hz, LR 24 dB/oct. type.
NOTE: To safely achieve maximum rated SPL output, audio signal must be filtered for extreme low frequency content. All vented cabinets should have this signal protection.

Input Connections:
2x Neutrik® Speakon® NL4MD & 1x 4-position barrier strip

Enclosure Materials & Finish:
Cabinet is constructed with 1 / 2” thick advanced technology composite fiber panels, coated in our black Hammerhead™ poly-urea with a lightly textured finish. Triple-layer moisture-repellant grille assembly, consisting of a perforated stainless steel outer grille, with inner hydro-phobic cloth mesh, and a proprietary third layer.

Mounting provisions:
(12) 3/8"-16 Threaded Mounting Suspension Points (3 each top & bottom and 2 each sides & back). Rubber washers are provided for use with 3/8” eyebolts, to assure a weather tight seal.
Three sets of 4) 1/4X20 SS inserts, the sets are located on the top, rear, and bottom for use with the Peavey® Versamount™ 70+ and the Peavey® Elements™ Pole Mount bracket.

Dimensions (H x W x D):
Front: 30.81 in. x 18.00 in. x 17.50in.

Rear: 30.81 in. x 15.13 in. x 17.50in.

Weight: 62 lb.
Dimensions: 31in. × 19in. × 18in.